Experience the Quality With Free WorkKeys Exam Questions That Helps Candidates Pass

At 1 inch representing 8 feet, multiply the measured inches by 8: 5.5 × 8 = 44 ft. Option A assumes 6 in × 6 ft. Option B (40 ft) would be 5 in × 8 ft. Option D (48 ft) would require 6 in × 8 ft. WorkKeys Applied Math frequently uses proportion and scale conversions from diagrams or blueprints. Documenting the ratio and checking units avoids common misreads and ensures accurate material estimates and layout planning on site.

Slippage arises from insufficient friction and tension. Oil on pulleys reduces friction; low tension reduces normal force. The appropriate fix is to remove contaminants (clean pulleys), install a new belt or retension to manufacturer specifications, and confirm alignment to prevent uneven wear. Option C treats a symptom but leaves contamination. Option D worsens slippage. Option A is unnecessary without diagnosis pointing to motor torque issues. WorkKeys Applied Technology stresses systematic troubleshooting—address root causes in a safe, spec-compliant order.

Failing to report = violation. Correct: B.

Option B is specific, polite, and actionable. Correct: B.

Near-misses must be reported to prevent recurrence. Option A ignores the rule, C delays compliance, D adds conditions not in policy. Correct: B.